Praj HiPurity
Purified-water, water for injection (WFI), RO, EDI, storage and distribution solutions.
Praj HiPurity Systems designs and supplies pharmaceutical-grade water and process utility systems — treating the plant water requirement as one continuous journey from raw water to point of use rather than a catalogue of standalone units. Delta Flow Tech supports Indian pharma and biotech plants across this journey with requirement capture, technical coordination, supply support and agreed site and lifecycle assistance. Final engineering, qualification and validation responsibilities remain qualified per project.
DFT's role on a Praj HiPurity water system is requirement capture, technical coordination with Praj HiPurity, supply support and agreed site and lifecycle assistance. Final engineering, qualification and validation responsibilities are confirmed per project.
A single water-system journey
Praj HiPurity structures a pharmaceutical water system as five coordinated work areas. Reviewing them together — rather than unit by unit — keeps feed-water quality, generation, storage and distribution consistent with the final point-of-use specification.
Connected treatment journey
From incoming water to the final utility point
Each stage informs the next, so the system is reviewed as one coordinated flow.
- 1
Raw Water to Point of Use
Define the incoming-water and point-of-use basis.
- 2
Pre-treatment
Condition the feed before purification.
- 3
Purified Water Generation
Generate purified water at the agreed grade.
- 4
Storage & Distribution
Preserve quality through storage and recirculation.
- 5
WFI & Pure Steam Generation
Provide WFI and pure steam where the process requires it.
Raw Water to Point of Use
The end-to-end view: assessing incoming raw water and defining the treatment train needed to reach the final point-of-use specification. Setting this basis first avoids under- or over-designing the individual stages.
- Raw-water source & full analysis (TDS, hardness, silica, chlorides, microbial)
- Target water grade (PW / WFI / utility)
- Peak & average demand (LPH)
- Number and type of user points
- Applicable pharmacopoeia (USP / EP / IP)
Pre-treatment
Feed-water conditioning and microbial control ahead of purification — multi-grade / disc filtration, softening, dechlorination, ultra-filtration and, where required, nano-filtration or a first RO pass — sized to protect the downstream membranes.
- Feed hardness & silica
- Free chlorine / oxidant load
- Suspended solids & turbidity (NTU)
- Required feed quality to RO
- Regeneration / backwash utility availability
Purified Water Generation
USP/EP-compliant PW generation — typically hot-water-sanitisable reverse osmosis combined with EDI in skid-mounted, zero-dead-leg configurations that hold sanitary conditions and consistent conductivity.
- Required flow (LPH) & recovery target
- Feed conductivity & temperature
- Sanitisation method (hot water / ozone)
- Conductivity & TOC limits
- Redundancy (single vs double pass, N+1)
Storage & Distribution
Holding generated water at grade from the generation outlet to every user point — sanitary storage tanks and 24/7 recirculating loops with hot-water (85 °C), pure-steam (121 °C) or ozone sanitisation, in SS316L electropolished tube with full traceability.
- Storage volume & buffer strategy
- Loop flow / return velocity (≥ 1 m/s)
- Number & distance of user points
- Sanitisation method & frequency
- Surface finish (Ra) & slope / drainability
WFI & Pure Steam Generation
Water for Injection and pure steam — standalone or 'Combi' distillation units (designed with Aqua-Nova) that produce WFI and pure steam together, with proportionate output regulation, faster start-up and 15–20 % higher pure-steam output for sterilisation cycles.
- WFI demand (LPH) & temperature (hot / cold)
- Pure-steam demand (kg/h) & pressure
- Feed-water source (PW)
- Plant steam availability
- Peak sterilisation load
What we offer under Praj HiPurity
Sanitary storage and 24/7 recirculating distribution loops that hold water at grade.
Storage & Distribution
Official product files and references
Showing references for Storage & Distribution. Select All above to see every reference.
Storage and Distribution
Official reference for sanitary storage and recirculating distribution loops.
Brochures are published by Praj HiPurity and are provided here for reference. Please refer to the official Praj HiPurity website for the latest revisions and regional variants.
Looking at Praj HiPurity for your plant?
Share your operating parameters or send a general enquiry — our engineering team will get in touch.
All third-party trademarks and logos referenced belong to their respective owners. Their use here does not imply endorsement or an authorized partnership unless explicitly stated.